Basic Info.
Model NO.
D-SRC-150
IP Rating
IP65
Certification
CE
Customized
Customized
Window Size
50, 100, 150mm
Weight
Approx 160- 190g
Ratio Uncalibrated
60mv/Ka@50Hz, 72mv/Ka@60Hz
Terminal
Cold Pressed Terminal, BNC...
Current Range(RMS)
≤100ka AC
Coil Section
12mm
Coil Resistance
85-255Ω
Read Accuracy
Uncalibrated < 5% Tolerance (Central Position)
Temperature Drift
Uncalibrated 200ppm/ºC
Position Error
±2% Maximum
Output on 0A(Zero Drift)
≤0.05mv
Phase Error
≤0.5°
Linearity
±0.2% of Reading
Bandwidth
1Hz to 100kHz (-3dB)
Operating Temperature
-40ºC to 85ºC
Transport Package
Poly Bag, Standard Export Carton
Specification
Ø 12 High Voltage Flexible Rogowski coil
Trademark
Meatrol
Origin
Shanghai
HS Code
8504311000
Production Capacity
50000PCS/Month
Product Description
Technical consultant
Susan
D-SRC
Ø12 High Voltage Flexible Rogowski coil
- High linearity from 1A to 100kA
- Wide dynamic range
- Very useful with large size or awkward shaped conductors or in places with limited access
- No danger from open-circuited secondary
- Not damaged by overloads
- Non-intrusive, no power drawn from the main
- Measurement uniformity at any position of the conductor inside the coil
- Excellent degree of rejection to the external current conductor
- IP67 protecting level.
- Voltage-resistant level:36kV
D-SRC is a flexible current transducer based on Rogowski principle, particularly suitable for measurement in combination with portable devices. D-SRC coils are available in different sizes and can be supplied according to customer's design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/or weight.
Due to its specific features, flexible Rogowski coil is an extremely suitable solution for current measurement and can be used in a number of cases where traditional current transducer is not the adequate solution.
D-SRC coil is provided with a shield against the influence of external magnetic fields, therefore it grants a stable measurement from low currents to hundreds of kA. The Rogowski coils must be connected to an electronic integrator
for 90°phase shift compensation and frequency equalization. Our DIN-RAIL and panel meters can interface Rogowski coils directly without the need of the external integrators. This is an advantage because there is no external boxes or any power supply with consequent ease of use. The particular features of the Rogowski coils combined with the extremely flexible input programming of our portable meters, allow to carry out measurement by all applications.
| Advantage • 12mm section grants high effective isolation • Lower zero drift down to 0.1mV • Voltage-resistant level:36kV Related Products S1 D1 S10 SW DA01 DA05 ME631 | Applications • Measuring devices, lab instrumentation • Power monitoring & control systems • Harmonics and transients monitoring • Very high current monitoring |
What is a Rogowski coil?
Rogowski coils have been used for the detection and measurement of electric currents for decades. They are based on a simple principle: an "air-cored" coil is placed around the conductor in a toroidal fashion and the magnetic field produced by the current induces a voltage in the coil. The voltage output is proportional to the rate of change of current. This voltage is integrated, thus producing an output proportional to the current.
By using precision winding techniques, especially developed for the purpose, the coils are manufactured so that their output is not influenced by the position of the conductor within the toroid, and to reject interference from external magnetic fields caused, for example, from nearby conductors. Basically, a Rogowski coil current measuring system consists of a combination of coil and conditioning electronics. Rogowski coil current transducers are used for the AC measurement.
They can be used in similar circumstances to current transformers, but for many applications they have considerable advantages:
• Wide dynamic range.
• High linearity.
• Very useful with large size or awkward shaped conductors or in places with limited access. Thanks to the structure without hard core, the coil can be easily manufactured according to the application or to the available space.
• Unlike traditional current transducers, there is no danger from open-circuited secondaries.
• They cannot be damaged by large overloads.
• They are non-intrusive. They draw no power from the main circuit carrying the current to be measured.
• They are also light weighted and in some applications are light enough to be suspended on the conductor being measured.
The transducer does not measure direct currents but, unlike a current transformer, it can carry out accurate measurements of AC component even if there is a large superimposed DC component, since there is no iron core causing saturation. This feature is particularly useful for measuring ripple currents for example in battery charging systems.
Specification
| MODEL | D-SRC-50 | D-SRC-100 | D-SRC-150 |
| Coil length | 180mm | 380mm | 555mm |
| Window size | 50mm | 100mm | 150mm |
| Coil Resistance | 85 (+/-10) Ω | 170 (+/-10) Ω | 255 (+/-10) Ω |
| Reference Rated current | ≤100kA | ||
| Weight | 160- 190g | ||
| Ratio Uncalibrated | 60mV/kA@50Hz, 72mV/kA@60Hz | ||
| Read Accuracy | Uncalibrated < 5% tolerance (central position, 25ºC) | ||
| Maximum current measurable | 100kA | ||
| Voltage-resistant level | 36kV | ||
| Coil Section | 12mm | ||
| Lead length | 2 meter | ||
| Temperature | Uncalibrated 200ppm/C | ||
| Calibrated 300ppm/C | |||
| Position Error | ±2% maximum | ||
| Output on 0A (zero drift) | ≤0.05mV | ||
| Phase error | ≤0.5° | ||
| Linearity | ±0.2% of reading | ||
| Bandwidth | 1Hz to 100kHz(-3dB) | ||
| Operating temperature | -40ºC to 85ºC | ||
| Storage temperature | -50ºC to 90ºC | ||
| For other requirements, please contact us for customization. | |||
| Conductor Position | Typical Error(%) |
| Adjacent to the center of coil | <0.5% |
| Adjacent to the inside edge of coil | <2% |
Materials
| Coil & cable | Thermoplastic rubber flame retardant UL 94 V-0 rated |
| Couplings | PP Flame-Retardant, UL 94 V-O rated |
| Color(coil) | Orange, Grey |
| Shield | 100% coil, 100% output cable |
Safety
| Certifications | CE marked |
| Complies with LVD EN 61010-1:2010 EMC EN 61326-1:2013 | |
| IP65 | |
| Voltage insulation | Coil: 2000V |
| Signal cable:1000V | |
| Safety | 1000V CATIII ,600V CATIV |
Dimensions tolerance:
A,B,C,F:±5mm, D:±0.2mm,E:±10mm
| Dimensions(mm) | D-SRC-50 | D-SRC-100 | D-SRC-150 |
| A.Windows size A | 80 | 115 | 175 |
| B.Windows size B | 50 | 100 | 150 |
| C.Coil O.D. | 104 | 139 | 199 |
| D.Coil section | 12 | ||
| E.Lead Cable Total Length | 2000 | ||
| F:Coil length | 275 | 380 | 550 |
Safety and warning notes
In order to guarantee safe operation of the transducer and to be able to make proper use of all features and functions, please read these instructions thoroughly! Safe operation can only be guaranteed if the transducer is used for the purpose, it has been designed for and within the limits of the technical specifications. Ensure you get up-to-date technical information that can be found in the latest associated datasheet under Rogowski website.
Caution! Risk of danger
Ignoring the warnings can lead to serious injury and/or cause damage!
The electric measuring transducer may only be installed and put into operation by qualified personnel that have received an appropriate training, The corresponding national regulations shall be observed during installation and operation of the transducer and any electrical conductor. The transducer shall be used in electric/electronic equipment the respect to applicable standards and safety requirements and in accordance with all the related systems and components manufacturers' operating instructions.
Caution! Risk of electrical shock
When operating the transducer, certain parts of the module may carry hazardous live voltage (e.g., Primary conductor). The user shall ensure to take all measures necessary to protect against electrical shock. The transducer is a build-in device containing conducting parts that shall not be accessible after installation. A protective enclosure or additional insulation barrier may be necessary. Avoid using transducer in rainy or humidity high voltage circumstances. Installation and maintenance shall be done with the main power supply disconnected except if there are no hazardous live parts in or in close proximity to the system and if the applicable national regulations are fully observed.
Safe and trouble-free operation of this transducer can only be guaranteed if transport, storage and installation are carried out correctly and operation and maintenance are carried out with care.
Caution! Risk of electrical shock
Do not apply around or remove from uninsulated hazardous live conductors which may result in electric shock, electric burn or arc flash.
WARING!
Do not stress the coil by applying any kind of mechanical force (transport, storage pressure, tight bending.) which will dramatically degrade the device's accuracy.
In high voltage circumstances, any operation is extremely dangerous! We do not take responsible for any danger or personal safety that is caused by any improper operation, damaged device or aging products. We are only responsible for the product itself.
More Special Rogowski coil+Integrator for fault indicator
Rogowski coil NZ special for high temperature electric furnace
MEATROL Rogowski coil Model No. Definition:
| Description | Connector model | Window size B | Signal cable length E | Ratio | Model No. | |
| Calibrated (mV/kA@50Hz) | Uncalibrated (mV/kA@50Hz) | |||||
| Ø 6 Mini type with fixing ribbon ties | MRC | 16 | 2m | 50 (60mV/kA@60Hz) | 60 (72mV/kA@60Hz) | MRC-16-2m-50 |
| 24 | MRC-24-2m-50 | |||||
| 36 | MRC-36-2m-50 | |||||
| Ø8 Rotate bayonet type Easy installation with fixing ribbon ties | NRC | 100 | 2m | 85 | 105 | NRC-100-2m-85 |
| 150 | 85 | NRC-150-2m-85 | ||||
| 200 | 50 | NRC-200-2m-50 | ||||
| Ø12 High Voltage 36kV | D-SRC | 50 | 2m | ________ | 60 (72mV/kA@60Hz) | D-SRC-50-2m-60 |
| 100 | D-SRC-100-2m-60 | |||||
| 150 | D-SRC-150-2m-60 | |||||
| Ø12 High Sensitivity | SRC | 50 | 2m | 333 | 360 | SRC-50-2m-333 |
| 100 | SRC-100-2m-333 | |||||
| 150 | SRC-150-2m-333 | |||||
| Ø 6 precision type | TRC | 16 | 2m | 50 | 60 | TRC-16-2m-50 |
| 24 | TRC-24-2m-50 | |||||
| 36 | TRC-36-2m-50 | |||||
| Ø8 Snap-in type Easy installation | ZRC | 50 | 2m | 100 / 85 / 50 | 105 | ZRC-50-2m-85 |
| 100 | ZRC-100-2m-85 | |||||
| 150 | ZRC-150-2m-85 | |||||
| Ø8 Spiral joint Suitable for long term stable installation | Y-FCT | B50 | 2m | 85 | 110 | Y-FCT-B50-2m-85 |
| B100 | 85 | Y-FCT-B100-2m-85 | ||||
| B150 | 85 | Y-FCT-B150-2m-85 | ||||
| B240 | 50 | Y-FCT-B240-2m-50 | ||||
| Ø8 High Frequency | H-FCT | B50 | 2m | 1.2 / 6.8 / 10 | H-FCT-B50-2m-10 | |
| B95 | H-FCT-95-2m-10 | |||||
https://shpytech.en.made-in-china.com/product/gFBazjSxhpcJ/China-STP-Lowest-Rogowski-Coil-Current-Clamp.html
https://shpytech.en.made-in-china.com/product/QFBtYorXXpWb/China-Rogowski-Coil-Handheld-Digital-Power-Quality-Analyzer-with-TFT-Display.html
https://shpytech.en.made-in-china.com/product/WwvtlOXKMmrB/China-Flexible-Rogowski-Coil-Ratio-50mv-Ka-Air-Cored-Current-Sensor-Coil-Current-Transducer.html
https://shpytech.en.made-in-china.com/product/RZoArVsPbpWu/China-Nrc-Promotion-Flexible-Rogowski-Coil-Current-Transducer.html
